The all-new Thinkware Q800PRO is the perfect harmony between design and performance. Encased in an industry award-winning design lies a new optical lens and an improved 5.14MP Sony STARVIS image sensor that delivers strikingly clear video quality in 2K QHD. Its advanced driver assistance system can warn you of potential forward collisions and lane departures along with alerts for red light cameras and speed cameras.
4x more vivid than HD resolution, 1440P (2560×1440) QHD captures every little detail you may have missed before.
Front and rear full HD recordings
The Q800 Pro’s Image Sensors allow constant front 2K QHD resolution recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
Super night vision 2.0
DASH CAM videos recorded in a low-light environment, such as dark alleys or parking lots, may not be clearly identifiable. SUPER NIGHT VISION 2.0 in the Q800 PRO uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- while driving or parked.
Sony Exmor R Starvis image sensor
Perfect image processing even in low-light environments.
The Sony Exmor R STARVIS Image Sensor applied to the Q800 PRO provides rich colours and the optimal resolution. STARVIS technology improves Exmor R’s low light sensitivity by providing optimal image quality in visible ray and near-infrared range, allowing clear imaging in low light environments.
Energy saving parking recording
Energy saving parking recording will reduce power consumption by 1/3 less and gives 3x longer video recording than normal parking mode. When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution. When in use, Q800 PRO will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for the next 20 seconds of the period.
Important clips and images may get deleted due to insufficient memory space during long continuous recordings, especially in standard parking recording mode which requires large memory for saving 15 to 30 frames per second. TIME LAPSE MODE in the Q800 PRO records 2 frames per second reducing the size of the video file. This allows video recordings in parking mode to continue up to 16 times longer than other dash cams.
* Parking recording mode can be activated upon installing the Q800 PRO with the hardwiring cable provided.
Safety camera alert
The THINKWARE DASH CAM Q800 PRO’s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.
- RED LIGHT WARNING SYSTEM
- SPEED CAMERA WARNING SYSTEM
- RED LIGHT & SPEED CAMERA WARNING SYSTEM
- AVERAGE SPEED WARNING SYSTEM
- MOBILE ZONE WARNING SYSTEM
- ROAD SAFETY WARNING SYSTEM
The THINKWARE DASH CAM Q800 PRO is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice warning.
Video enhancement technology
THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market, ensuring the most vivid video recordings under any circumstance.
Wide dynamic range
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings. The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.
Night time picture quality correction
Images from the videos recorded during nighttime driving on dark streets are generally difficult to make out. The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and colour control as well as noise cancellation.
A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem. The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.
Various autonomous recording modes
Various Recording Modes and Automatic Switch between Modes
- Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
- Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
- Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
- Energy Saving Mode
The dash cam will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for next 20 seconds of the period.
Check recorded images and update firmware using a smartphone
Your smartphone and the Q800 PRO can be connected via the exclusive application ‘THINKWARE DASH CAM Mobile Viewer for Q800 PRO’ with built-in Wi-Fi in the navigation. Check, download or delete recorded images, update firmware or update safe driving information on the application.
PC / Mac viewer
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.